Halloween Matryoshka Nesting Dolls, 6-Piece Multicolor Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Six Halloween nesting dolls in folk matryoshka style, with snap-fit halves and flush 4-color inlays for AMS printers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
## Overview
A six-piece Halloween nesting doll set in traditional folk matryoshka style: Black Cat, Scarecrow, Jack-o'-Lantern, Skeleton, Ghost, and a solid Mini Jack at the center. Each doll opens at its widest point and snaps closed, and every doll nests inside the next. The artwork is printed in, not painted: each color is a separate flush inlay part, using orange, black, yellow and white.
## Print Settings
- Printer: Bambu Lab X2D, 0.4 mm nozzle, AMS
- Material: PLA. Indoor display piece, so PLA is fine.
- Layer height: 0.20 mm
- Walls / infill: Bambu Studio defaults (2 wall loops, 15% sparse infill)
- Supports: none
- Orientation: bottom shells base-down, top shells rim-down (head up), Mini Jack base-down. The 3MFs are already oriented.
- Brim: a 5 mm outer brim is recommended for the top shells, which stand on a narrow rim.
- Filament slots are pre-assigned in the 3MF: 1 orange, 2 black, 3 yellow, 4 white. Load your AMS in that order, or reassign the parts in Bambu Studio.
Files:
- Full set on one plate (fits a 256 x 256 bed, 230 x 230 mm footprint)
Color changes: every layer that shows more than one color needs a filament swap, so this is a long print with a lot of purge. Printing the whole set on one plate shares each layer's changes across all pieces and cuts the total to about a third of printing doll by doll. A dual-nozzle printer cuts it further. The set also prints well in a single color: assign every part to one filament.