Scooter / Bike Phone Stand Mount (M365)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone holder for bikes or scooters that with a straight handlebar.
- Rating
- 5 / 5
- Likes
- 615
- Downloads
- 2,767
- Makes
- 12
- Views
- 15,276
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
STLs
All files are in correct Z orientation
- Main (Use one of the following) +main.stl (for ~22.5mm handlebar) +main-short.stl (shorter stem) +main-32mm.stl (for ~32mm handlebar)
*jaw.stl *screw.stl
- Clip (Use one of the following) +clip.stl (for ~22.5mm handlebar) +clip-with-loop.stl (use this if you want to hang a bag on your scooter that uses velcro loops, and you don't have any space left on the handlebar) +clip-32mm.stl (for ~32mm handlebar)
Screws & Nuts
*4x M4x20 *8x 10mm Washers *4x M4 Nuts *1x M4x50 (screw this inside the printed screw to strengthen it)
About the design
This is originally designed to fit Xiaomi M365 Pro scooter which has ~22.5mm diameter handlebar. But should fit on most bikes or scooters that have a straight handlebar. It needs 45mm of handlebar space. Phone sizes I've tries are from small iphone 5 to large "max" sized iphones.
If you need a custom size...
Comment if your handlebar is much bigger than 22.5mm, and i can give you updated STL. :)
My handlebar diameter is 22.5 mm, but it should fit few mm bigger handlebars as well. For smaller diameter, you can use rubber padding.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,3 or less
Infill:
20% or higher
Notes:
No supports needed, and all files are in correct Z orientation. For extra strength increase Perimeters to 3 (or more) instead of infill (20% is enough).
Category: Mobile Phone