1 / 5
Customizable Laptop Riser Wedges - Two-Piece Stand, 3 Angles — image 1
1 / 5

Customizable Laptop Riser Wedges - Two-Piece Stand, 3 Angles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two separate laptop riser wedges: 8/12/16 degree presets and native editable recipes. Unprinted prototype.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Customizable laptop riser wedges

Two independent wedges with front stops. Select width, length and slope by editing the native TrueGeometry Playground recipe. Three matching pairs are supplied:

- Low: 180 x 30 mm per wedge, 8 degree ramp, rear 27.595 mm.

- Medium: 200 x 35 mm, 12 degree ramp, rear 44.449 mm.

- High: 220 x 40 mm, 16 degree ramp, rear 64.650 mm.

Unprinted prototype. Stability, friction, laptop fit, ventilation, strength and temperature behaviour are untested. No rated load or cooling benefit is claimed. Check your device feet, front edge and vents, then test cautiously with a cheap weight before using a laptop. Stop if it slides, rocks, flexes or blocks ventilation. Soft grip pads are not included.

The cover is a software render from the native meshes with an illustrative laptop, not a photo or proof of fit. The laptop is not included.

Files

Print a matching Left and Right pair of the same preset. They are identical geometry. Do not mix slopes. Six STLs, three individual pair recipes, All_presets_recipe.txt, a marked-screenshot how-to PDF and guide gallery pages are included. Flat bottoms are at Z=0 in the STLs.

High is 220 mm long before brim and edge margins. Check usable printer space. Untested starting settings: 0.2 mm layers, four perimeters, 25-35% infill, flat base down. Inspect the layer preview and decide brim/support requirements in your slicer. No physical print or slicer test has been done.

Customize with native commands

Full commands, all presets, sizing formulas and limitations: https://blog.truegeometry.com/0_0_0_0/blogs/post-f8068f6f.html

The full TrueGeometry Playground commands are in the article and attached recipe files. Open https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html, cancel Agent Manager if it opens, choose Script, paste a complete recipe and click Run. A refresh clears the scene. Keep the recipe files.

Example Medium pair:

/sm_params 35 2 0.44

/sm_part 0 0 200 0 200 44.4485 5 3 5 11 0 11

/tag_last MediumLeft

/move 0 0 -80

/sm_params 35 2 0.44

/sm_part 0 0 200 0 200 44.4485 5 3 5 11 0 11

/tag_last MediumRight

/move 0 0 80

/view iso

Width is the first /sm_params number. Length and rear height are coordinate edits in /sm_part, not live sliders. For length L and angle A, rear height H = 3 + (L - 5) x tan(A), in millimetres with A in degrees. The front ramp starts at (5,3); the stop is 11 mm high and 5 mm deep. Retest every modification.

Verification and disclosure

Native Playground only. No external CAD geometry, booleans, text or mesh repair. Each wedge is one closed mesh. The combined recipe was rerun in a fresh scene: all six native mesh arrays and transforms matched exactly. Each has 20 triangles, no degenerate triangles and no boundary or non-manifold edges at 0.00001 mm welding for analysis. These are digital checks, not physical performance tests.

Original design. CC BY 4.0. AI-assisted: Yes.

https://blog.truegeometry.com/0_0_0_0/blogs/post-f8068f6f.html

Playground

Tags