1 / 1
Ancillary Steam Frame Expansion Gasket (max comfort, max fov) — image 1

Ancillary Steam Frame Expansion Gasket (max comfort, max fov)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use a pimax crystal/super gasket with the steamframe. Maximize comfort and fov. Good for large face + brow.

Rating
0 / 5
Likes
7
Downloads
12
Makes
0
Views
216
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)

  1. Use a pimax crystal/super gasket with your steamframe.

  2. Maximize your FOV (no attachment layer)

  3. Maximize your comfort (huge gasket with lots of surface area, relieves pressure on cheekbones and brow)

You will need:

  1. Hotglue or double-sided tape

  2. Pimax crystal/super face gasket

  3. Maybe a vive gasket works too? 

Printing:

  • Print upright with tree supports.

  • Use at least 3 perimeters

Installation:

  • Slide the gasket adapter over your frame

  • Either use double sided tape on the tabs or a dab of hot glue

  • Hold until glue is dry or press until tape grips

  • Either use Velcro strips to attach your gasket or glue/tape directly to the interface

Removal:

  • If you used hotglue, a small amount of rubbing alcohol will release it!

  • The gasket only attaches to the facial interface not the core module, all normal detachment methods for this work. 

Tags