JIGS FOR MODIFYING IKEA TARVA BED HEAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Ikea TARVA is a classic, "value" bed frame, but it didn't fit under our window!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The proportions of the IKEA TARVA bed that sits in my office have always bothered me, and when we decided to place it under the window, the head was 60mm too high, so I had my chance to make amends!
These templates are set up to cut 60mm from the height, re-drill all the holes in exactly the same relative positions, and reassemble the lot in what to my eye is a nicer proportion, better suited to the scale of a modern room.
The exploded images should be enough to guide you through the work, but if you need further explanation please ask before you cut!
All models should print as downloaded, please note that I did use organic supports to support the holes as it is a very expedient solution when an exact template is required. Take care drilling, my PLA did last the necessary time, but these are not meant to be resusable!
I printed in PLA, 0.28mm draft mode.