1 / 5
(UNTESTED) MD2006 Roots Blower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/2 Scale MD4012 Blower Assembly (Designed for Jared's 1/2 scale ACA Hurricane)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
THIS MODEL HAS NOT BEEN TESTED YET AND MAY HAVE SOME ISSUES
This is a 1/2 scale of the ACA Hurricane 130 MKII blower assembly, made for Jared's 1/2 scale Hurricane model. In theory, this should output >56 CFM at 4 to 5 PSI, but it's probably going to be more like 50 CFM at a much lower pressure. I will post the results below when I get them.
Hardware Required
14329-2RS Bearings (x5)
3450 RPM 56 Frame AC Motor (MUST BE LESS THAN 8 INCHES IN HEIGHT)
M3 Nuts & Bolts Kit
M3 Set Screws (Optional)
M4 Nuts & Bolts Kit
5/16" Nuts & Bolts (x4)
Teflon Tape (Optional)