Stackable A5 Paper Holder System (Base & Top Models)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular A5 paper holder with a filament-saving mesh base and 1cm front overhang for easy grabbing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
This is a sleek, modular A5 paper holder system designed to keep your desk organized. The system consists of two models: a Base unit and a Top stackable unit.
Both feature a modern hexagonal grid pattern at the bottom, which reduces printing time and filament use while maintaining excellent structural strength.
Designed for Quick Paper Retrieval
The tray depth is intentionally designed to leave a 1 cm paper overhang at the front. Combined with the low-profile front wall, this allows you to easily slide your fingers underneath and grab sheets effortlessly.
Stackable Design & Assembly Tips
To ensure the stacked trays stay securely in place, use one of these quick methods at the connection joints:
Rubber pads: Stick small silicone or rubber dampening feet between the joints to prevent slipping.
Double-sided tape: Use thin mounting tape for a secure, semi-permanent bond.
Super glue: Fuse the tiers together permanently using standard CA glue.
Features
Modular & Stackable: Expand your storage vertically by printing as many top units as you need.
Smart Overhang: 1 cm front overhang makes lifting and pulling out paper completely effortless.
Perfect Fit: Custom width designed specifically for standard A5 paper (148 × 210 mm).
Material Saving: The honeycomb mesh base minimizes filament waste and printing time.
Recommended Print Settings
Supports: No supports needed! The bridges in the hexagonal pattern are small enough to print perfectly flat on most well-tuned printers.
Infill: 15% - 20% (Gyroid or Grid recommended).
Perimeters / Wall Loops: 2 or 3 for optimal wall strength.
Material: PLA, PETG, or ABS/ASA.