1 / 11
Hexagon lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mounted lamp for indirect lighting. It is assembled using LED aluminium profiles connected by 3d printed
- Rating
- 0 / 5
- Likes
- 253
- Downloads
- 896
- Makes
- 0
- Views
- 5,969
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed parts (for the given example)
- 3,19 m LED aluminium profil with cover (e.g. LED Aluminium Profil)
- 2,9 m LED strip (10 mm wide). Make sure the strip can be cut in 10 cm long pieces. I used WS2812b Neopixel.
- LED controller and power supply
- wires
- nylon cord
Needed Tools
- Glue
- Metal saw
- Soldering iron and solder
Assembling
- Cute the aluminium profil into 110 mm long pieces
- Connect the profiles using the corner/connector pieces and glue (See HexLamp.pdf)
- Cute the led strip into 100 mm long pieces
- Connect the stripes with short wires (apprx. 20-30 mm) (See Wiring.pdf and HexLamp.pdf)
- Glue the LED strip into the profiles
- Mount the distance pieces
- Attach the nylon cord in order to hang the lamp on the wall using a nail.
Software
You can finde the custom software to control this lamp on my GitHUB. I am using an arduino Nano IoT to control the lamp. The software is including a Webvisu. You can also find the installation instructions on GitHUB.