1 / 3
PC4-M10 BMG extruder adapter for Delta Flyer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PC4-M10 BMG extruder adapter for Delta Flyer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
PC4-M10 BMG extruder adapter for Delta Flyer
The gap for the extruder on the Delta Flyer's side panel is only 14mm in diameter, which is too narrow for any other PC4-M10 BMG adapter I could find, so I made my own.
Print Settings
The walls of the threaded section are only 1.83mm thick. Either use the included 3mf file or copy these settings:
7 walls (enough to avoid gap infill)
0.12mm layer height
Arachne walls
Pick whatever filament you prefer. I used ASA.
Build Instructions
Screw the PC4-M10 coupler to the printed part. Don't tighten too much! Open the extruder and replace the metal PTFE coupler (on the left) with the printed part:
