1 / 2
Thick Clamp For Ruixin RX-009 and Friends — image 1
1 / 2

Thick Clamp For Ruixin RX-009 and Friends

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fits slightly over a 1/4 inch or 6mm slab of steel, in case you have a thicc boi to sharpen in your Ruixin jig.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

The Ruixin RX-009 and various related/derivative knife sharpening jigs are all fine pieces of kit, with some inherent limitations. One of them is that you're limited on sharpening angles with knives that are very narrow, i.e. with not much distance between the spine and the edge. The other is that it can't clamp knives that any thicker than 4mm or 0.158" — that's like 9/64" in the old money. YesIdidmeasureithowdidyouknow.

Anyhoo, I routinely make knives that are thicker than that. This necessitated one of two things, to wit: Either investing considerably more time and effort into freehand sharpening to produce results acceptably pretty enough (rather than simply functional) for the knives I sell. Or, adapting my Ruixin jig for fatter steel.

Guess which avenue I took.

Much to my immense surprise, PLA is perfectly rigid enough to make an effective replacement clamp. Just, with a bigger gap between the jaws. These will fit anything from about 4mm up to 6mm,  maybe 6 and a half which is a hair over 1/4". That ought to be enough for anyone other than the real nutters, and if I ever become that nuts in the future I'm sure you all will be the first to know.

Hardware is required. Sorry about that, but although I did briefly consider the idea of making this fully printed and reusing the existing clamp and mounting screws provided with the kit, I don't think that would actually work very well. This will require:

  • One regular 5mm nut (for mounting to the frame)

  • One regular 4mm nut (for the clamp)

  • One M5 screw 16mm or so long to mount to the frame

  • One M4 screw no shorter than 16mm long (for the clamp)

Alas, the factory thumbscrews that come with the Ruixin kit are not long enough to reach the nuts, and threading the plastic is unlikely to result in a very robust final product; see above.

If you find the jaws have slippage issues, I find that applying one layer of regular electrical tape to the insides helps immensely. I do this with the stock aluminum clamps anyway to avoid scratching the finishes on my blades, but if you manage to scratch a piece of steel with these given that they'll be made out of plastic, I'll give you a medal.

Tags