1 / 4
Simple Laptop Stand — image 1
1 / 4

Simple Laptop Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For ~14" laptops.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I started using my laptop to run local AI models, needed something to both give it better ventilation and reclaim most of the desk space under it.

Had a look around, plenty of models to choose from but after 30 minutes of looking around for something I liked, I decided it would be quicker to just whip together my own. I saw a few models I sort of liked but they either were single pieces that made me nervous about layer adhesion or had bracing in place that would reduce desk access.

My model has two risers and one press-fit connecting rod printed flat to eliminate layer adhesion concerns from the strength-critical plane, at the expense of printing in three plates to do so. Apart from the risers' footprint, the rest of the space is open.

The photos are with v1, which had 100mm clearance at the front and was angled 20 degrees. That was slightly too tall at the front, too tall in the back and too steep for my liking, so I reduced the front clearance to 90mm and the angle to 15 degrees for v2, then threw in a 5mm taper on the previously straight columns for slightly better parallelogram stiffness.

Requires ~150g of filament, PETG recommended for heat and impact tolerance.

Tags