Laptop Riser Feet - Two Wedges for a Better Typing Angle and Cooler Laptop (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two wedges that tilt your laptop up at the back for a better typing angle and more airflow underneath.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tilt your laptop up at the back: put one wedge under each back corner for a more comfortable typing angle, and the gap underneath lets the fans breathe. A small lip at the high end stops the laptop sliding off.
DETAILS
• Two wedges, 70 mm long and 30 mm wide, rising to 18 mm.
• Prints flat with no supports. Bambu Studio: 48 min, 21 g, no warnings.
• Stick a strip of rubber or felt underneath if your desk is slippery.
CUSTOMIZE (OpenSCAD)
Height (8 to 40 mm), length and width.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.