1 / 3
Christmas Ornament Hook – S Hook and Snap Clip for 6 mm Branches — image 1
1 / 3

Christmas Ornament Hook – S Hook and Snap Clip for 6 mm Branches

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ornament hooks for the Christmas tree: S hook and snap clip with anti-drop tooth. Prints flat, no supports.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Christmas Ornament Hook – S Hook with 50 mm Shank and Snap Clip for 6 mm Branches

English

Please post a photo of your print or any fit problem: we fix it quickly.

Hooks for hanging baubles and ornaments on the Christmas tree, in two versions: an S hook with a 50 mm straight stem (overall height about 62.5 mm) and a snap clip with a 40 mm straight stem (overall height about 56 mm), both for 6 mm branches. The S hook slips over the branch. The clip is designed to snap shut on the branch. The lower hook has an anti-drop tooth: the gap for the ornament wire is 1.5 mm and the tooth makes it harder for the wire to slip out. Prints flat, no supports needed.

For light decorations, up to 50 g. Always test the part before use.

Italiano

Pubblica una foto della tua stampa o un eventuale problema di montaggio: lo correggiamo in fretta.

Ganci per appendere palline e decorazioni all'albero di Natale, in due versioni: gancio a S con gambo dritto da 50 mm (altezza totale circa 62,5 mm) e clip a scatto con gambo dritto da 40 mm (altezza totale circa 56 mm), entrambi per rami da 6 mm. Il gancio a S si infila sul ramo. La clip è pensata per chiudersi a scatto sul ramo. In basso l'uncino ha un dentino anti-caduta: lo spazio per il filo della pallina è di 1,5 mm e il dentino rende più difficile l'uscita del filo. Si stampa piatto, senza supporti.

Per decorazioni leggere, fino a 50 g. Prova sempre il pezzo prima dell'uso.

Deutsch

Bitte poste ein Foto deines Drucks oder ein Passproblem: Wir beheben es schnell.

Haken zum Aufhängen von Kugeln und Schmuck am Weihnachtsbaum, in zwei Versionen: S-Haken mit 50 mm geradem Schaft (Gesamthöhe etwa 62,5 mm) und Schnappclip mit 40 mm geradem Schaft (Gesamthöhe etwa 56 mm), beide für Äste von 6 mm. Der S-Haken wird über den Ast geschoben. Der Clip soll sich einrastend um den Ast schließen. Der untere Haken hat einen Sicherungszahn: Der Spalt für den Draht der Kugel beträgt 1,5 mm, und der Zahn erschwert das Herausrutschen des Drahts. Wird flach gedruckt, ohne Stützen.

Für leichte Dekorationen, bis 50 g. Das Teil vor der Verwendung immer testen.

Español

Publica una foto de tu impresión o cualquier problema de ajuste: lo corregimos enseguida.

Ganchos para colgar bolas y adornos en el árbol de Navidad, en dos versiones: gancho en S con vástago recto de 50 mm (altura total de unos 62,5 mm) y clip a presión con vástago recto de 40 mm (altura total de unos 56 mm), ambos para ramas de 6 mm. El gancho en S se desliza sobre la rama. El clip está pensado para cerrarse a presión sobre la rama. El gancho inferior tiene un dientecillo antiescape: el hueco para el hilo de la bola es de 1,5 mm y el dientecillo dificulta la salida del hilo. Se imprime plano, sin soportes.

Para decoraciones ligeras, hasta 50 g. Prueba siempre la pieza antes de usarla.

Print settings

Material: PETG (PLA for indoor use)

Nozzle (mm): 0.4

Layer height (mm): 0.2

Infill: 100%

Supports: none

Orientation: flat on the bed, as exported

License: Personal use only. Commercial use of prints requires a separate license.

Package content

Level: Free

Sizes (2): s_ramo6_l50, clip_ramo6

Formats: STL, 3MF

Tags