Halloween Spider Web - Round & Corner Decorations, Optional Smiling Spider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorate for Halloween with a round or fan-shaped spider web! Choose a smiling spider, a plain spider, or just the web.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
A little spider with a big smile for your Halloween display! This set includes a round spider web and an 85-degree fan-shaped web for corner arrangements. Each shape comes in three versions: with a smiling spider, with a plain spider, or without a spider.
The smiling version has recessed round eyes and a curved smile. The spider has eight raised legs, with the feet joined to the web. Each STL is one connected piece and requires no assembly.
Use them for a Halloween table display, a shelf arrangement, or a seasonal craft project. The round web and fan-shaped web offer two different layouts to mix and match.
**Six files included:**
- 01-round-spider-face.stl - round web with a smiling spider.
- 02-round-spider-no-face.stl - round web with a plain spider.
- 03-round-web-only.stl - round web without a spider.
- 04-sector-spider-face.stl - fan-shaped web with a smiling spider.
- 05-sector-spider-no-face.stl - fan-shaped web with a plain spider.
- 06-sector-web-only.stl - fan-shaped web without a spider.
**Dimensions at original scale (width x depth x height):**
- Round web with spider: approximately 201 x 196.1 x 36.7 mm.
- Round web only: approximately 201 x 196.1 x 2 mm.
- Fan-shaped web with spider: approximately 276.2 x 206 x 36.7 mm.
- Fan-shaped web only: approximately 276.2 x 206 x 2 mm.
The web threads are 3 mm wide and 2 mm thick. The fan-shaped web spans 85 degrees and has five radial strands.
**Printing notes:**
Place the flat web on the build plate, in the supplied orientation. Check the full footprint in your slicer, including any skirt or brim. The fan-shaped version is 276.2 mm wide in its supplied orientation; rotate it or scale it down if needed to fit your printer. Scaling also changes the thread thickness, leg thickness and facial details.