1 / 1
UNS R75 weir bends for D-D Mesh Jump guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UNS R75 weir bends for D-D Mesh Jump guard
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
UNS R75 weir bends for D-D Mesh Jump guard
These bends allow you to route the d-d mesh jump guard around the weir on a UNS R75 aquarium. They fit into the standard D-D bars. The orignal weir cover should still fit in its spot.
To fit on the R75 you'll need to cut 2 x 140mm lengths and 1 x 215mm.
The challenge comes when fitting the mesh to avoid it pulling the middle of the guard forward as I wanted to avoid adding bracing across the middle of the tank.
This may work with other UNS models with different lengths of the bars, but I have not tested that theory.
Supports are required.