DA-K6402W 2.5GbE Switch 1U Rackmount for 10" and 19" Racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model includes STEP files to print a rack mount for the small unmanaged 2.5GbE Switch (sometimes called: DA-K6402W)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is about providing a printable 1U rack mount for the small unmanaged 2.5GbE Switch (sometimes called: DA-K6402W but can also have various other names).
The switch measures: 133mm in Width, 67mm in Depth and 33mm in Height
This project includes a main enclosure where the switch can slide in from the back and is held in place by lips/clips on the back side (be careful when inserting the switch as not to break them off like I did).
Then there are 3 types of brackets that go on each side. One for my custom 340mm wide Bosgame M5 rack (Screwed in via M5x8mm screws), one for 10" Serverracks and one for 19" Serverracks. The brackets are screwed into the plastic of the switch enclosure via 6x M3x16mm screws (12mm also possible, ISO4762 recommended).
Print recommendations:
Material: PLA, PETG or ABS (depending on how warm your switch gets)
Avoid super brittle materials for the clips
Orientation: Face/Front down
The project incudes the FreeCAD project file alongside the STEP files.
The design is inspired by PileOPaul's Switch Rack Mount design:
https://www.printables.com/model/1276621-mokerlink-2g080110gsm-10-inch-rack-mount
