1 / 23
Flywheel vehicle  "remix of #3566283" — image 1
1 / 23

Flywheel vehicle "remix of #3566283"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix for the flywheel powered car #3566283. So far thing-i-verse has not let me add the remix info in the…

Rating
4 / 5
Likes
11
Downloads
40
Makes
0
Views
408
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a remix for the flywheel powered car #3566283. So far thing-i-verse has not let me add the remix info in the right place. https://www.thingiverse.com/thing:3566283

Demo and build video on youtube. https://youtu.be/hgVMQ4UHOGA

So I changed the body frames to have stops to keep the bearings in place.

I split the axles so they can print with out supports and are held together by the gears and bearings.

I changed the flywheel from a few metal nuts for mass too using large flat washer's with a inside hole of 1/2 inch and outside of 2 inches.

I changed the wheels to 3d printed ones with rubber O ring tires.

I changed the gears to 1 percent larger and be sure to print the gears with no elephants foot so the gear teeth on the bed are clean. I us Prusa slicer as it has a Advanced setting for this.

I did not change the gear design but should have. They have a very fine pitch, a gear design with less teeth and deeper teeth would be better.

So all parts print with no supports.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: any PLA any


Notes:

Print gears with no bed elephants foot so you do not have to clean up all the small gear teeth.

Category: Mechanical Toys

Tags