Raised Anti-Vibration Feet (36mm) for Duender or v-slot extrusion based printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
36mm raised feet with rubber dampeners for the Duender 3D printer. Improves bottom airflow & reduces vibration noises.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Overview
Raised foot mounts designed for the Duender 3D printer (by Sergei Irbis). These feet elevate the frame by approximately 36mm (varies with printer weight), providing essential ground clearance for bottom-mounted intake fans (such as those used with electronics enclosures/backpacks) while isolating printer vibrations and reducing noises drastically.
Key Features
36mm Elevation: Creates ample clearance underneath the printer for optimal intake airflow and cable routing.
Vibration Dampening: Integrates rubber anti-vibration pads/dampeners to absorb high-frequency motor and motion resonance.
Direct Frame Fit: Mounts securely to tapped ends of standard 4020 aluminum extrusions on the Duender frame.
Hardware Required
4x Rubber Dampeners / Feet Pads (AliExpress Link)
8x M5 Screws (M5x15 or longer)
8x M5 T-Nuts for 2020 extrusion
Print Settings Recommendation
Material: ABS or ASA recommended (PETG is acceptable but may deform over time)
Layer Height: 0.2mm
Walls / Perimeters: 4 to 5 (needs to be sturdy to support printer weight)
Infill: 30% - 40% (Grid or Gyroid)
