DeWalt DCV501HB Vacuum Accessory Clip | Crevice Tool + Brush Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-on DCV501HB holder for the crevice tool and round brush. Tested fit. No supports. STL + editable STEP.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A snap-on holder that keeps the crevice tool and round brush on the vacuum. It clips around the DCV501HB nose, with the accessories stored along the top. No screws or glue.
Print with the flat front plate on the bed and the two hollow posts pointing up, as supplied:
- ASA, 0.4 mm nozzle
- 0.20 mm layers, 4 walls, 30% infill
- No supports or brim
- 100% scale; dimensions in mm
The H2D slice estimates about 1 hour and 25 g. Fit samples were tested in black Creality ASA. Other materials and printers may need adjustments. PLA can check geometry, but its snap and grip will not predict ASA behavior.
Fit the ring with its opening underneath the vacuum nose and the posts pointing back toward the body. Viewed from behind the vacuum, the brush goes on the left and the crevice tool on the right. Push each accessory's connector socket onto its post.
Includes the print-oriented STL and an editable STEP so the ring and posts can be adjusted separately. Designed for the DCV501HB and its original accessories; other models have not been checked.
The complete clip has been printed, fitted, and confirmed to work on the DCV501HB.
Images are CAD renders, not photos of a printed part.