1 / 10
A6 Index Card Organizer with Lid / Karteikartenhalter – Parametric Model — image 1
1 / 10

A6 Index Card Organizer with Lid / Karteikartenhalter – Parametric Model

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A6 index card organizer (Karteikartenhalter) six compartments, an optional lid. Parametric Fusion model.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Share Alike

An A6 card organizer with six stepped compartments and a removable lid. The holder can also be used on its own without the lid. Smooth and wavy textured versions are available, along with a parametric Fusion 360 model for customization.

Material and print settings

I printed the parts in SUNLU PETG using these settings:

  • Layer height: 0.2 mm

  • Wall generator: Arachne

  • Wall loops: 2

  • Top layers: 5

  • Bottom layers: 3

  • Infill: 8% gyroid

  • Seam position: Aligned Back

Print times and filament usage

All figures are approximate and given per part. Print times and filament usage may vary depending on your printer and slicer settings.

Part

Print time

Filament

Smooth holder

6 h

250 g

Smooth lid

3 h 30 min

150 g

Wavy holder

7 h 45 min

250 g

Wavy lid

5 h 30 min

150 g

A complete holder and lid use approximately 400 g of filament in either version.

Lid fit and assembly

Small tabs secure the lid to the holder. The fit still needs some fine-tuning, so the tabs may not hold the lid firmly enough as printed.

I added a little hot glue to the tabs to improve the fit. This works well on my prints, but the result may vary with your printer's tolerances. You can see this in the image.

Adding your own texture with BumpMesh

A STL file with the holder and lid combined is included for importing into BumpMesh (https://bumpmesh.com/). Applying the texture to both parts together creates a continuous pattern across the join, as shown in the wavy version.

After adding your texture, separate the holder and lid into two objects in your slicer before printing.

The wavy models have large file sizes because I used a high quality setting in BumpMesh. They may take a while to load and slice.

Included files

  • Smooth and wavy models: Holder and lid variants.

  • Parametric Fusion 360 model: For editing and customizing the design.

  • STL file with the holder and lid combined: For adding your own texture in BumpMesh.

Tags