A6 Index Card Organizer with Lid / Karteikartenhalter – Parametric Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A6 index card organizer (Karteikartenhalter) six compartments, an optional lid. Parametric Fusion model.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
An A6 card organizer with six stepped compartments and a removable lid. The holder can also be used on its own without the lid. Smooth and wavy textured versions are available, along with a parametric Fusion 360 model for customization.
Material and print settings
I printed the parts in SUNLU PETG using these settings:
Layer height: 0.2 mm
Wall generator: Arachne
Wall loops: 2
Top layers: 5
Bottom layers: 3
Infill: 8% gyroid
Seam position: Aligned Back
Print times and filament usage
All figures are approximate and given per part. Print times and filament usage may vary depending on your printer and slicer settings.
Part | Print time | Filament |
|---|---|---|
Smooth holder | 6 h | 250 g |
Smooth lid | 3 h 30 min | 150 g |
Wavy holder | 7 h 45 min | 250 g |
Wavy lid | 5 h 30 min | 150 g |
A complete holder and lid use approximately 400 g of filament in either version.
Lid fit and assembly
Small tabs secure the lid to the holder. The fit still needs some fine-tuning, so the tabs may not hold the lid firmly enough as printed.
I added a little hot glue to the tabs to improve the fit. This works well on my prints, but the result may vary with your printer's tolerances. You can see this in the image.
Adding your own texture with BumpMesh
A STL file with the holder and lid combined is included for importing into BumpMesh (https://bumpmesh.com/). Applying the texture to both parts together creates a continuous pattern across the join, as shown in the wavy version.
After adding your texture, separate the holder and lid into two objects in your slicer before printing.
The wavy models have large file sizes because I used a high quality setting in BumpMesh. They may take a while to load and slice.
Included files
Smooth and wavy models: Holder and lid variants.
Parametric Fusion 360 model: For editing and customizing the design.
STL file with the holder and lid combined: For adding your own texture in BumpMesh.