1 / 6
Espresso cup puck screen holder and stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Puck screen holder and stand with espresso cup form
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Puck screen holder/stand, the screen slot is 1,75 mm.
Printed mine in PLA without supports, depending on how well your printer is tuned you can use super glue to glue the front and the back side if needed. In my case ne glue was needed. The parts don't fall out and they can be disassembled if they need to be cleaned.
Had some 5x2mm magnets laying around so I added those to the second model (also didn't glue them in place and they seem to be holding pretty good)
You can print it with magnets or just use the stand.