1 / 4
CEN Racing Jimny Batterytray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Batterytray for better center of gravity
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
With the original batterytray from cen, the center of gravity is to high and the car rolls over in corners.
I designed a batterytray, which can be mounted between the rear wheels in the chassis. The batterytray is for batteries with approx. max. 90 x 35 x 20mm.
I printed mine with PETG, 0.2mm layer hight, oriened like shown on the picture 1. Due to the thin wobbly walls, the quality on top may be not the best, but like this, you can print it without support.
You need additional 5 hex nuts M3, 4 Screws M3 x 10 and 1 Screw M3 x 8 to mount the battery tray in the chassis.