Customizable Gear Ratio 1:1:1 Hand-Crank Souvenir v3 - Vertical Standing (20T+20T+20T)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric 1:1:1 gear-train souvenir (20T+20T+20T) that spins: printed gears on shafts, crank drive. Drag the sliders!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
CUSTOMIZABLE PARAMETRIC MODEL - edit numbers, drag sliders, rebuild. This is a TrueGeometry Playground recipe model: every dimension comes from the variables at the top of the script (gear module, tooth counts, thickness, axle size, clearances, crank offset). No CAD skills needed.
WHAT IT IS
A working gear-ratio 1:1:1 hand-crank souvenir (20T+20T+20T), vertical standing layout. Printed gears spin on printed axles in a support frame with real shaft holes; the red crank is pinned through gear A and turns the whole train. Great desk toy and a hands-on demo of gear ratios: count turns of the crank vs. the output gear.
Customize it in 2 minutes:
Open TrueGeometry Playground (free, browser-based): https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html
Click the Script button, paste the recipe (attached .txt or the blog article below
), press Run.
Open the Variables panel, tick Auto-Run, then drag the sliders - tooth counts, module, thickness, axle size - and watch it rebuild live. (Ctrl+Enter also re-runs the script; lists, if any, are edited as text.)
HONEST NOTES
Untested design study: geometry is checked on screen (no floating or clashing parts in the default build) but I have not printed this exact set yet. Please post a Make if you print it - it helps the community.
STLs are native Playground exports; the mesh is functional but not a single watertight manifold (parts are separate shells by design - no boolean unions), and a few facets can have zero normals. Slicers handle them fine; run a mesh repair if your slicer complains.
Clearances baked in: support holes are axle +0.1 mm radius, spacer bores +0.3 mm, crank hole +0.1 mm. If your printer over-extru
des, drill the holes out slightly.
Change tooth counts a lot and you may need to adjust the plate/base variables too - the article explains the sizing rules.
FILES
*_Assembly.stl - the full assembled model (reference / single-piece display print)
Component STLs - print these for the working mechanism: gears, axles, spacers, caps, base + back plate, crank pin, crank knob
*_recipe.txt - the full variable-first Playground script
*_Playground_Guide.pdf - step-by-step: run the script, customize with sliders, export your own STLs
PRINTING
0.2 mm layers, 3 walls, 15-20% infill, PLA. No supports needed for the flat-packed parts. One spacer and one cap per axle - see the assembly guide in the article.
Full build article with the complete recipe, sizing tables and assembly photos:
https://blog.truegeometry.com/0_0_0_0/blogs/post-726363d1.html
Run/customize in TrueGeometry Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html
License: CC BY 4.0 - remix and share with attribution. AI-assisted design (TrueGeometry Playground).