Screw-Top Pots - Small Threaded Jars with Grip Lids for Beads, Screws, Seeds or Pills, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two little threaded jars (30 and 44 mm inside) with grippy screw-on lids that close in two and a half turns.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Little threaded pots for beads, screws, seeds, pills, SD cards, spices or earrings: a 30 mm and a 44 mm pot (inside sizes) with ribbed screw-on lids. A coarse 4 mm thread closes them firmly in two and a half turns.
DETAILS
• 30 and 40 mm tall; 1.6 mm walls and floors.
• Prints with no supports: the pots stand upright, the lids print top-down, and the thread is shaped so nothing overhangs more than 45 degrees.
• Bambu Studio: 1 h 42, 43 g for both pots and lids. If a lid is tight, raise the thread clearance a little.
CUSTOMIZE (OpenSCAD)
Inside diameters, heights and thread clearance.