Screw-Top Pots - Small Threaded Jars with Grip Lids for Beads, Screws, Seeds or Pills, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two little threaded jars (30 and 44 mm inside) with grippy screw-on lids that close in two and a half turns.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Little threaded pots for beads, screws, seeds, pills, SD cards, spices or earrings: a 30 mm and a 44 mm pot (inside sizes) with ribbed screw-on lids. A coarse 4 mm thread closes them firmly in two and a half turns.
DETAILS
• 30 and 40 mm tall; 1.6 mm walls and floors.
• Prints with no supports: the pots stand upright, the lids print top-down, and the thread is shaped so nothing overhangs more than 45 degrees.
• Bambu Studio: 1 h 42, 43 g for both pots and lids. If a lid is tight, raise the thread clearance a little.
CUSTOMIZE (OpenSCAD)
Inside diameters, heights and thread clearance.