Wine Bottle Stoppers - 4 Reusable Stoppers with Heart, Star, Ring and Cat Tops and Sealing Ribs, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Four reusable wine bottle stoppers with fun tops and a ribbed tapered plug that fits standard bottle necks.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Four reusable wine bottle stoppers with fun tops (a heart, a star, a round one with a ring and a cat) and a tapered plug with three sealing ribs that fits standard wine bottle necks. Good for an opened bottle of wine, olive oil or vinegar, and a nice little gift.
DETAILS
• 38 mm tops; plug tapers from 21 to 16.5 mm over 26 mm.
• Prints with no supports: each stopper prints top-down, so the plug narrows upwards and the ribs slope at under 45 degrees.
• Bambu Studio: 57 min, 25 g for all four.
• TPU seals best; PETG works well too. Use a food-safe filament.
CUSTOMIZE (OpenSCAD)
Plug diameters and length, and top size.