Wine Bottle Stoppers - 4 Reusable Stoppers with Heart, Star, Ring and Cat Tops and Sealing Ribs, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four reusable wine bottle stoppers with fun tops and a ribbed tapered plug that fits standard bottle necks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Four reusable wine bottle stoppers with fun tops (a heart, a star, a round one with a ring and a cat) and a tapered plug with three sealing ribs that fits standard wine bottle necks. Good for an opened bottle of wine, olive oil or vinegar, and a nice little gift.
DETAILS
• 38 mm tops; plug tapers from 21 to 16.5 mm over 26 mm.
• Prints with no supports: each stopper prints top-down, so the plug narrows upwards and the ribs slope at under 45 degrees.
• Bambu Studio: 57 min, 25 g for all four.
• TPU seals best; PETG works well too. Use a food-safe filament.
CUSTOMIZE (OpenSCAD)
Plug diameters and length, and top size.