RC Plane Dive Siren - Hardware Free!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 100% 3D-Printable siren for rc planes!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
A 100% 3D-Printed, Hardware free Siren for rc planes!
I wanted a simple, 100% 3d printable siren for my rc plane that just works, so I originally just wanted to print a ready made file that worked instead of having to design one from scratch. The problems arose when most designs couldn't be powered by the relative wind from an aircraft in flight. Thats when I decided to just design one from scratch.
Videos:
Mounting:
This was originally designed to be mounted on my Arrows Hobby Bigfoot 1300mm landing struts, which are 2.5 mm aluminium bars (this is the 'clip' version of the base file) but can be modified to fit anything you may want.
Siren Specs:
6 Ports/Slots
Disk style (lighter)
Printing:
NO SUPPORTS (Print as is in file)
Layer hight: Ideally 0.20mm or finer
Infill: Whatever but lower infill leads to lighter rotor, thus increasing low airflow performance.
This design is inspired by Germy Ballswells design (https://cults3d.com/en/3d-model/gadget/stuka-sirens-for-rc-planes) but IS NOT the same, I made this FROM SCRATCH.