1 / 3
mt32-pi | zero - Official Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The official case for mt32-pi | zero.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 1,067
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The official case for mt32-pi | zero.
- The TOP half should be flipped upside-down before printing.
- Print with supports (print bed only). In other words, there should only be supports below the PCB mounting holes.
- Support settings from this thread recommended for easier support removal.
👉 A YouTube video is available here to demonstrate the proper/safe PCB insertion method.
⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️
INSERTING THE PCB IS DIFFICULT AND MUST BE DONE CAREFULLY TO AVOID DAMAGE.
IT IS EASY TO DAMAGE THE JOG WHEEL AND PCB IF YOU ARE NOT CAREFUL!
DON'T USE EXCESS FORCE!
⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️⚠️