1 / 4
Spinning Top Display Stand (Beyblade Fan Art) - Adjustable — image 1
1 / 4

Spinning Top Display Stand (Beyblade Fan Art) - Adjustable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adjustable and customizable display stand for Beyblades to be placed in showcases

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I encourage you to get creative and design your own cardboard covers for the 3D printed frame using the templates and finish it to a full own customized stand for your Spinning Tops to place it in a showcase.

Build advice and preparation
There are different cardboard body templates, with and without cutouts for the shield. Before starting, decide which version you want to build and choose the right template.

  • Tools: Cutting mat; scalpel; ruler; printer for heavyweight paper; 3D printer (of course ;D); fingernails for pressing down the folding lines;

  • Materials: PLA; semi-gloss or dull heavyweight paper (recommended: 200 g/m²); paper glue;

  • Small marks on the printed cardboard template indicate the folding lines.

  • Be precise when cutting, folding, and gluing the cardboard.

3D-Printed Frame

  1. 3D-print all the parts. There is a prepared STL file called AllParts_SpinningTopStand.stl, which already contains all parts in the correct amount and orientations, including mirrored parts where needed.

  2. The assembly manual for the 3D-printed parts can be found in the Manuals_and_Templates.pdf attachement. Follow the manual to assemble it.

  3. Adjust the stand to your spinning top.
    Top diameter: Exchange the stopper pins or rotate them by 180° at the front plate.
    Pin size: Adjust the spacing by sliding the bars inside the frame.

Cardboard

  1. Apply your own design to the cardboard template using image-editing software. Alternatively, you can use an AI to create your design. Make sure it does not change the dimensions of the template! The templates can be found in the Manuals_and_Templates.pdf attachement.

  2. Print the cardboard at 100% scale and cut it out. Use a ruler to get straight cuts.

  3. Pre-fold the lines following the manual in the Manuals_and_Templates.pdf in the attachement. All printed surfaces should be visible on the outside after folding.

  4. Apply the glue to the marked areas and glue the parts together. It might help to use glue that takes a moment to dry. You can also place the cardboard over the 3D-printed frame to check how well it fits before the glue dries and tweak it.

If you have any questions, suggestions, or feedback, feel free to leave a comment!

Tags