Nissan Silvia s15 shift boot retainer clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A design for those looking for a replacement shift boot retainer clip for their Nissan silvia s15
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A design for those looking for a replacement shift boot retainer clip for their Nissan silvia s15. Similar to those clips being sold online for over $20. This is a prototype design so some minor tweaks may be needed depending on your setup. Print in a high temp filament such as ABS. Something that can withstand car interior temps.
Hardware needed:
8x 25mm M6 bolts
16x m6 nuts
8x washers
The clip goes inside the shift boot and the bolts go through the holes you cut in the shift boot to line up. A waser and nut go over the fabric to hold it in place. You then place the clip and boot into the holes in the shifter trim and put the remaining nuts on the bottom.