Norton commando Oil junction block cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.39 – €0.48 net (excluding VAT)
For file: Norton commando Oil junction block cover_0.4n_0.15mm_PETG_MK4S_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 25.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prevents dirt in the engine while overhauling the engine.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for my 1974 Norton commando 850 MK2a.
The cover holds in place by the original oil junction block bolt (Andover Norton part-no: 03.0448).
Should fit on all Commandos 750 and 850.
Prints without support. 0,15mm structural.
Remove before starting the engine.
Bear in mind that PETG looses its shape resistance around 65°C to 75°C (149°F to 167°F) if you intend using a heat gun or blowtorch.
See also my Norton commando cylinder exhaust port cover here.
See also my Norton commando Tacho drive house cover here.
Norton commando Camshaft/engine rotater here.
Use at your own risk.
This 3D model is provided "as is" without any warranties. The creator assumes no liability for any damages, injuries, or losses resulting from the printing, assembly, or use of this object.