Norton commando Oil junction block cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents dirt in the engine while overhauling the engine.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for my 1974 Norton commando 850 MK2a.
The cover holds in place by the original oil junction block bolt (Andover Norton part-no: 03.0448).
Should fit on all Commandos 750 and 850.
Prints without support. 0,15mm structural.
Remove before starting the engine.
Bear in mind that PETG looses its shape resistance around 65°C to 75°C (149°F to 167°F) if you intend using a heat gun or blowtorch.
See also my Norton commando cylinder exhaust port cover here.
See also my Norton commando Tacho drive house cover here.
Norton commando Camshaft/engine rotater here.
Use at your own risk.
This 3D model is provided "as is" without any warranties. The creator assumes no liability for any damages, injuries, or losses resulting from the printing, assembly, or use of this object.