1 / 6
Peg Cross: Indoor Tent Anchor for Hard Floors — image 1
1 / 6

Peg Cross: Indoor Tent Anchor for Hard Floors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A cross-shaped anchor that holds tent stakes and loops on hard floors, so an indoor tent stays put without drilling.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Pitch a tent indoors when stakes have nothing to grab. Peg Cross is a flat, X-shaped base that gives your tent stakes, pole tips, and corner straps something to lock into on hard floors like laminate, tile, or concrete. No drilling, no tape.

I designed it for my Kelty Daydreamer 4P, which I keep set up inside the house, where regular stakes are useless. It should work with any tent that uses thin stakes and corner straps.

How it works

  • Each of the four arms ends in a round post with a 5 mm hole.

  • Slide a tent stake (or the pin on the end of a tent pole) through the posts so it lies flat along the arm.

  • Hook the tent's corner strap or stake ring over the stake, the same way you would outdoors.

  • Use one cross per corner.

Specs

  • Size: 190 x 190 x 20 mm

  • Hole diameter: 5 mm. Fits thin wire and pin-style stakes; measure yours before printing.

  • Tested with: Kelty Daydreamer 4P and the stakes that come with it

  • Fits the 256 x 256 mm bed on Bambu Lab X1, P1, and A1 printers

Print settings

  • Printer: Bambu Lab X1 Carbon, 0.4 mm nozzle

  • Material: PLA (shown in black)

  • Layer height: 0.20 mm

  • Infill: 15% grid, 2 walls

  • Supports: none

  • Orientation: flat on the bed, as set in the 3MF

Files

  • 3MF with the print profile ready to open in Bambu Studio

  • STEP source file, designed in Onshape, if you want to change the hole size or arm length

If you print one, please post a make. I'd love to see which tents people use it with.

Print profile

PLA, 0.2mm layer, 2 walls, 15% infill, no supports

Tested on a Bambu Lab X1 Carbon with a 0.4 mm nozzle in PLA.

  • Layer height: 0.20 mm

  • Walls: 2

  • Infill: 15% grid

  • Top / bottom shells: 5 / 3 layers

  • Supports: none needed

  • Brim: auto

Print it flat, as oriented on the plate. One plate makes one cross; print one per tent corner.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 1

  • Print time: about 53 min

  • Filament: PLA #FFF144 (26 g)

  • File: the 3MF labeled "print profile" in Model Files

Also on MakerWorld, with one-click print profiles for Bambu Studio: Peg Cross: Indoor Tent Anchor for Hard Floors

Tags