Peg Cross: Indoor Tent Anchor for Hard Floors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cross-shaped anchor that holds tent stakes and loops on hard floors, so an indoor tent stays put without drilling.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Pitch a tent indoors when stakes have nothing to grab. Peg Cross is a flat, X-shaped base that gives your tent stakes, pole tips, and corner straps something to lock into on hard floors like laminate, tile, or concrete. No drilling, no tape.
I designed it for my Kelty Daydreamer 4P, which I keep set up inside the house, where regular stakes are useless. It should work with any tent that uses thin stakes and corner straps.
How it works
Each of the four arms ends in a round post with a 5 mm hole.
Slide a tent stake (or the pin on the end of a tent pole) through the posts so it lies flat along the arm.
Hook the tent's corner strap or stake ring over the stake, the same way you would outdoors.
Use one cross per corner.
Specs
Size: 190 x 190 x 20 mm
Hole diameter: 5 mm. Fits thin wire and pin-style stakes; measure yours before printing.
Tested with: Kelty Daydreamer 4P and the stakes that come with it
Fits the 256 x 256 mm bed on Bambu Lab X1, P1, and A1 printers
Print settings
Printer: Bambu Lab X1 Carbon, 0.4 mm nozzle
Material: PLA (shown in black)
Layer height: 0.20 mm
Infill: 15% grid, 2 walls
Supports: none
Orientation: flat on the bed, as set in the 3MF
Files
3MF with the print profile ready to open in Bambu Studio
STEP source file, designed in Onshape, if you want to change the hole size or arm length
If you print one, please post a make. I'd love to see which tents people use it with.
Print profile
PLA, 0.2mm layer, 2 walls, 15% infill, no supports
Tested on a Bambu Lab X1 Carbon with a 0.4 mm nozzle in PLA.
Layer height: 0.20 mm
Walls: 2
Infill: 15% grid
Top / bottom shells: 5 / 3 layers
Supports: none needed
Brim: auto
Print it flat, as oriented on the plate. One plate makes one cross; print one per tent corner.
Sliced for: Bambu Lab X1 Carbon
Plates: 1
Print time: about 53 min
Filament: PLA #FFF144 (26 g)
File: the 3MF labeled "print profile" in Model Files
Also on MakerWorld, with one-click print profiles for Bambu Studio: Peg Cross: Indoor Tent Anchor for Hard Floors