Aircraft control rudder bracket v2.0 / Кронштейн для РУД и РУС, для игры в авиасимулятор v2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Кронштейн для RUD и РУС, для игры в авиасимулятор
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Это кронштейн для РУД и РУС. Прочно держится на столе для усиления нужны 2 металлические штанги диаметром 6мм длинной 220мм смотри картинки. Кронштейн для столешницы толщиной 30мм и тоньше. Отверстия под девайсы просверлите сами, длинный болт и шайба есть. Bolt_big вставляете в pipa_plane и проворачиваете, x и число в названии файла означает количество копий(болты)
PLA / PETG
Заполнение 50%
This is a bracket for RUD and RUS. It holds firmly on the table; for reinforcement, you need 2 metal rods with a diameter of 6 mm and a length of 220 mm — see the pictures. The bracket is for a tabletop with a thickness of 30 mm and thinner. Drill the holes for the devices yourself; a long bolt and a washer are included. Insert Bolt_big into the pipa_plane and turn it; the x and the number in the file name indicate the number of copies (bolts).
