Counting matching models…
This model is designed to fit on any desk 45mm in thickness or less. The base plate is designed to fit both the stick and the throttle. It attaches to the base of the Hotas via the holes used for the suction cups. The opening for the M3…
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
This fully 3d printed HOTAS mount can be flipped under the desk when not in use. It can be printed with PLA, using 3 layers for bottom and top and 3 loops for walls, with 25% infill (I used gyroid pattern for it). It's also recommended to…
I am using this on Logitech/Saitek x52 (non-pro). Description from original model by RabidRedRabbit on thingiverse: The Saitek X52 Pro has an additional inner spring. With the original X52 spring plate, the stick became too stiff and the…
This is a cover for the Intel X520-DA2 on the M720q. It probably also works for the M920q but I don't have one. Here is the link for the OnShape
Hi People of the Internet. UPDATED April 2020 My wife gave me a day off from the kids, and after amusing myself on the internet and finally finishing Titanfall 2... epic game btw... seriously underrated. I present my 2 hour off the cuff…
Per VOGE Valico 525DSX DSX525 DS525X DSX 525 DSX accessori serbatoio liquido
Modern TVs don't have buttons on them, so its a bad time when you lose the remote. Lots of systems (like Tile bluetooth dongles) let you ring devices to find them. I got tired of losing my remote, so I made this to lash a bluetooth dongle…
Shroud for mounting 4010 cooling fan. Use M3 heat inserts.
This is a thick walled rugged case for whatever you need to store. The interior dimensions are 162 x 82 x 52mm. The corner bumpers can be printed with rigid material like PLA, or with a flexible material such as TPU and are attached with…
This is a very soft version of the great X52 Spring Plate. RabidRedRabbit, already made a soft version: https://www.thingiverse.com/thing:2405980 But I still want it a little bit softer. So I reduce the overall height thus compressing the…
This part makes the magnet relocation mod for the Saitek X52 Pro (and regular) easy - simply print two of them, remove the base from your stick, remove the stock parts, install the stock magnets into the parts and reassemble. Print…
90x52mm Oval Base (STL) for 3D Printing – Includes Magnet Holes Enhance your miniatures with this 90x52mm oval base STL file , designed for 3D printing . Perfect for wargames like Warhammer, this base features pre-made 10x2mm magnet holes…
I've always been a bit scared of bumping the din-connector and breaking something, now it's secure. For other format downloads (including original Fusion design) go to https://a360.co/2RA1wIP Designed for M3 machine screws, I used 2.5mm…
I just bought 2 IKEA Svartasens and finished my HOTAS Setup with it. This is just a compilation of usefull things for the HOTAS itsself. What you get: Platform for joystick and throttle for installation IKEA Svartasen pillar Joystick…
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
This deck mount was remixed for the Saitek x52 HOTSA. I have also added the twist stays and washers, use 3x10mm screw to secure the arms to the desk bracket. Printed with 5 walls 20% infill
When I am using my X52 HOTAS together with my Oculus Rift I have to find all switches blindly. For me it is difficult to distinguish between the three T-switches at the base of the joystick by just touching them. So I made a clip-on cover…
Much like the designer of the original Thing I was looking for extra buttons for VR flight sims. Since i play in an Obutto R3volution simpit , there is only a small throttle support plate rather than a desk for the throttle, so it was…
40mm Fan shroud designed for Intel X540-T2 10GbE NIC's, will also fit some X520 models, 1U and 2U variations, options for extended heatsink coverage and bottom/top fan mount. 2U card fans are friction fit or can be mounted with…
This is a 20x52x10 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 20mm External diameter : 52mm Width : 10mm Balls : 8 POM ball…
This is a simple fan holder designed to fit on top of a radiator / heat-sink on X520-DA2 Ethernet adapted with two FSP ports. The holder is secured to the board by the two openings and clips on the upper edge. The fan is secured to the…
This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair. Mounted with standard M5 screws and nuts - two for each hinge and three for each clamp - and with two holes for a zip-tie to organize the cables…
printed in PETG
This is a drop in replacement that allows an NZXT Kraken watercooler to be converted to a standard BSP G1/4 water cooling loop. Just swap the O-rings and screws from the original 3/8in barbfittings. Not sure how this needs to be printed,…
Adapter plates & connectors to mount a X52 HOTAS ( http://www.saitek.com/uk/prod/x52.html ) to SVARTÅSEN Laptop stands ( http://www.ikea.com/us/en/catalog/products/40242177/ ). might work for other HOTAS if they have the same mounting…
I'm testing some high-power electronics and needed something to buffer my voltage supply, so I threw this together. It holds 3x 30D x 52H x 10P snap-in aluminum electrolytic capacitors – I'm using it with SLPX123M063E9P3. Also includes…
Adapter for Saitek (now Logitech I guess) X52 Pro. It's off center to better balance on the SVARTASEN leg. The platform is universal for throttle and stick, its designed to point the 'Y' arms towards the player. If you want it other way…
Simple design for fast print - measured the spring and stick dimensions and designed the biggest compression block I could fit while still having movement in the spring and being able to fit the block over the stick. requires a bit of…
Working the toggle switches on the Saitek X52 Pro (and I would guess the X52 as well) when you're wearing a VR headset can be a bit of a pain (Elite: Dangerous Commanders using the default profile may well know what I mean). So, I really…
Standing Card/Note Holder 140x60x52mm. Made for Radiography reception. Sorry for the blurry photo. I don't have the holder in my possession anymore and that was the only photo I got from the place. Nuclear sign seen in the photos are made…
This is a battery box and cover for a Multistar 6sx5200mah 10C lipo. I developed this box for the Firefly6 but it could be used for just about anything using this lipo. Unfortunately the box will stick out above the wing of the Firefly6…
Designed for 300x52x100 2kg spool desktop stand holder check your spool dimensions before printing Rod is 48mm in diameter and 130mm wide disclaimer: finally I didn't need one so I haven't make one, not sure if OK although FreeCAD…
Could do with some imrovement. Print as fine as you can, I resorted to some sanding.
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too). I used 3 links, you might need a different number. Use M4x16 bolts and M4 nyloc nuts to assemble the whole thing. I used…
Držák motoru 25Dx52L mm HP 6V ( https://www.pololu.com/product/1573 ).
Intel x520-DA2 10GB custom riser for Lenovo ThinkCenter M720q. I think the right retention hole may need to be moved a little. I saw a few others that exist but non that attached to the board itself and secured to the chassis.
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! Once I began flying flight simulators in VR I quickly realised that hitting the correct key on the keyboard is a challange when you can't actually see the keyboard. My HOTAS setup just…
Tren de aterrizaje para quad X525 Print Settings Printer Brand: RepRap Printer: Hephestos Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Category: Hobby
Box mit den Maßen 138x37x52. Fusion 360 Datei zum bearbeiten angehängt.
XT60 connector for X525 frame. With source file. Category: R/C Vehicles
This is a design derived from my design and other civrays. Https://www.thingiverse.com/thing:454728 Https://www.thingiverse.com/thing:1640533 Print Settings Printer: Bq Hephestos Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
This VTX Mount designed for the Eachine TX526 is to be mounted at the rear of the top plate... Print Settings Printer Brand: Prusa Printer: Prusa Clone **Rafts:** No Supports: Yes **Resolution:** 0.15 Infill: 50% Category: R/C Vehicles
If there is a problem please let me know Print Settings Printer: BQ Hephestos Supports: Yes Resolution: 0.2 Infill: 50% Category: Hobby
A tray for the Eachine TX526... Uses the frame spacer poles to attach, also allows fo cable ties, if you wish... As you can see, easy access to the Button and Display... Print Settings Printer Brand: Prusa Printer: Prusa Clone **Rafts:**…
10GTek X520-DA1 bracket for Lenovo M720Q / M920Q (pcie riser needed), 3,5mm notch added for usb cable of 4010 blower fan if needed.
This is a mount to attach an eachine tx526 to an strix alatus flying wing. The bottom is open to keep good airflow to the transmitter. The zip tie holes are tiny and fit the dollar tree tool bench zip ties. You will definitely need to…
Customized version of http://www.thingiverse.com/thing:735213 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=735213 Instructions Using the following options: arm_thickness = 2.4 tube_diameter = 10…
The connectors on the X52 /Pro are a bit flimsy. This holds them in place and protects them from bending/damaging. It is basically like this https://www.thingiverse.com/thing:2564232 part from thatdude902 but easily reconnectable with a…
I created some parts to mount LED strips to my Quadcopter.
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
The card edge chassis baffle that came with this network card did not fit the m920 chassis. I thought it would look nice to follow the square hole motif the chassis had going.
A compact 3D printable ammunition box designed for 5.6x52R cartridges. The box is made for hunters who want a practical and organized way to store and transport their ammunition. Designed with a sturdy lid and suitable for use at home, at…
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
Need a way to transport your cigar damage-free? Here is a simple design with a screw on lid. The case itself fits up to a 6x52 cigar. The lid has knurling to aid your grip to unscrew the container for quick access.
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
The connectors on the X52 /Pro are a bit flimsy. This holds them in place and protects them from bending/damaging. It is basically like this https://www.thingiverse.com/thing:2564232 part from thatdude902 but easily reconnectable with a…
This is a single shot mod for the 6.5 carcano created using the 2 models listed below. https://www.thingiverse.com/thing:5766167/files https://www.thingiverse.com/thing:4714469
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Model of the 6.5x52mm Carcano cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Ono of the plastic mounting brackets on my x52 broke, so i created a model to replace it. Figured i would post it in case any of you encounter the same issue. Note: I just created the smaller piece as i was able to epoxy the larger one.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
I printed PETG 50% filling, Pipa_horizont_print to print horizontally as in the picture, to use a 5mm stud for the mortgage
This is a single shot mod for the 6.5 carcano created using the 2 models listed below. https://www.thingiverse.com/thing:5766167/files https://www.thingiverse.com/thing:4714469
MUST BE IN PETG, ABS OR (PREFERABLY) BETTER. Some trimming will be required because I messed up the dimensions a bit
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch Look in my Ammo Boxes Collection…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
A lot of people had done the replacement of the POT to a Hall Effect Sensor in thier Thurstmaster T16k sticks so i tried to do the same with my original Saitek X52. Had to design a riser that lets the sensor sit correctly while being…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
