Drill Depth Stops - 8 Split Collars for 3 to 10 mm Bits, Labelled, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slip a stop onto the drill bit at the depth you want and you can't drill too deep. Eight sizes, 3 to 10 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slip a stop onto the drill bit at the depth you want, and you can't drill too deep: for wall plugs, shelf pins, dowels, blind holes in furniture and not going through the back of a cabinet. Eight stops for bits from 3 to 10 mm; the split ring grips the bit like a spring, and each is labelled with its size.
DETAILS
• For 3, 4, 5, 6, 7, 8, 9 and 10 mm bits, 12 mm tall.
• Prints flat with no supports. Use a slower drill speed near the stop so it doesn't spin round and mark the work.
• Bambu Studio: 36 min, 14 g for all 8.
CUSTOMIZE (OpenSCAD)
The bit sizes and how tight they grip.