1 / 3
Pegboard Beer Cap Opener (SKADIS & LEGO compatible) — image 1
1 / 3

Pegboard Beer Cap Opener (SKADIS & LEGO compatible)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bottle opener for Pegboard, with optional container for removed bottle caps. Additional variant with Flat Top.

Rating
0 / 5
Likes
20
Downloads
31
Makes
0
Views
214
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Lost your beer opener again?

Just mount it to your pegboard and easily open your beer everytime!

With optional, attachable and removable container for the bottle caps.

UPDATE v2:

Easier opening by changed screw angle

Additional clips at the back of the Main Body, to further improve stability. No wobble anymore!

Default printing orientation is upright now, improving bricks top.

Change Bin clip orientation for changed printing orientation.

Printing

Print best in PETG (PLA should also work).

Suggested Settings for v2 (also see attached .3mf file):

Part

#

Print Orientation

Support

Infill

Main Body (Opener)

1x

Standing upright

Only touching Buildplate

~15%

Cap Bin

1x (optional)

Standing upright

Only for top hook

Hook part on top with ~90%

Hooks

3x

Laying flat

No

min. 50%

Installation

You just need a screw with countersunk head. Tested with SPAX 3,5*16, SPAX 3,5*20 and M3 16-20mm.

Should also be compatible with UNC/UNF #5. Please let me know if it fits :)

Put the hooks inside the pegboard and just slide the beer opener onto it. Push it down a bit, until it is tight and not wobbling anymore.

Put the screw into the small hole of the Opener Part. The Screw head should stand out about 4mm.

If the screw head does not grab the cap, slightly loose the screw, if the screw head scratches the bottle glass, slighty tighten it.

Attach the bin to the main body, it should clip it. If it is too difficult at the first assembly, use a tool to slightly loosen the clamp inside the main body until it moves freely. after that the container should clip in easily.

Tags