1 / 3
Pegboard Beer Cap Opener (SKADIS & LEGO compatible) — zdjęcie 1
1 / 3

Pegboard Beer Cap Opener (SKADIS & LEGO compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bottle opener for Pegboard, with optional container for removed bottle caps. Additional variant with Flat Top.

Ocena
0 / 5
Polubienia
20
Pobrania
31
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Lost your beer opener again?

Just mount it to your pegboard and easily open your beer everytime!

With optional, attachable and removable container for the bottle caps.

UPDATE v2:

Easier opening by changed screw angle

Additional clips at the back of the Main Body, to further improve stability. No wobble anymore!

Default printing orientation is upright now, improving bricks top.

Change Bin clip orientation for changed printing orientation.

Printing

Print best in PETG (PLA should also work).

Suggested Settings for v2 (also see attached .3mf file):

Part

#

Print Orientation

Support

Infill

Main Body (Opener)

1x

Standing upright

Only touching Buildplate

~15%

Cap Bin

1x (optional)

Standing upright

Only for top hook

Hook part on top with ~90%

Hooks

3x

Laying flat

No

min. 50%

Installation

You just need a screw with countersunk head. Tested with SPAX 3,5*16, SPAX 3,5*20 and M3 16-20mm.

Should also be compatible with UNC/UNF #5. Please let me know if it fits :)

Put the hooks inside the pegboard and just slide the beer opener onto it. Push it down a bit, until it is tight and not wobbling anymore.

Put the screw into the small hole of the Opener Part. The Screw head should stand out about 4mm.

If the screw head does not grab the cap, slightly loose the screw, if the screw head scratches the bottle glass, slighty tighten it.

Attach the bin to the main body, it should clip it. If it is too difficult at the first assembly, use a tool to slightly loosen the clamp inside the main body until it moves freely. after that the container should clip in easily.

Tagi