1 / 4
Tesla P100 Triple Shroud for 120 mm Fan, Easy Mounting — image 1
1 / 4

Tesla P100 Triple Shroud for 120 mm Fan, Easy Mounting

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This shroud lets you cool three Tesla P100 GPUs with a single 120 mm fan.

Rating
0 / 5
Likes
3
Downloads
44
Makes
0
Views
276
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

The model is designed to mount 3 Tesla P100s to a 120 mm fan with high static pressure. I use an Arctic P12 Pro, which seems to be totally fine for normal workloads, and only struggled after a few minutes in a GpuBurn test where the two P100s pulled around 220W each. The shroud is on purpose a tighter fit to the GPUs to be able to use the fan in pull configuration. I have only tested this with two P100s so far, on my own 3-GPU frame with riser cables, whose card spacing may differ slightly from a normal motherboard. It should fit three double-wide cards in adjacent, double-spaced PCIe x16 slots, but I could not verify this. I also don't own other cards like the P40, so I assume they fit, but this is untested. Please let me know if you tested any of this so I can update the description accordingly. 

Mounting: The 120 mm fan is mounted with 4 threaded M3 heat inserts and 4x M3x30 screws (for a standard 25 mm thick fan, the usual radiator-fan screws). The shroud is mounted to the three GPUs with 6 M3 screws, with a minimum length of 4 mm (I used 8 mm).

Adapter for 2 or fewer cards: "3-p100-to-2-or-less-adapter" covers the unused GPU opening. I used standard PC case screws (3.4 mm thread diameter, the same thread as the screws that come with an ATX power supply).

Print settings: Printed in the shown orientation for minimal supports with a 0.4 mm nozzle, 0.20 mm layer height, and 15% Gyroid infill in PETG on an Ender 3 in about 4 h. 

I designed my shroud from scratch in FreeCAD, taking all measurements myself. I only used the idea of FizzyDuncDizzel’s Tesla P100 Triple-GPU Fan Shroud as inspiration and tried to improve upon it, mainly by making mounting easier and possibly airflow better. Since I never printed the original model, I can’t say whether my design actually cools better, only that mounting is easier.

If you like what I'm doing, consider buying me a coffee.

Tags