Tesla P100 Triple Shroud for 120 mm Fan, Easy Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shroud lets you cool three Tesla P100 GPUs with a single 120 mm fan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model is designed to mount 3 Tesla P100s to a 120 mm fan with high static pressure. I use an Arctic P12 Pro, which seems to be totally fine for normal workloads, and only struggled after a few minutes in a GpuBurn test where the two P100s pulled around 220W each. The shroud is on purpose a tighter fit to the GPUs to be able to use the fan in pull configuration. I have only tested this with two P100s so far, on my own 3-GPU frame with riser cables, whose card spacing may differ slightly from a normal motherboard. It should fit three double-wide cards in adjacent, double-spaced PCIe x16 slots, but I could not verify this. I also don't own other cards like the P40, so I assume they fit, but this is untested. Please let me know if you tested any of this so I can update the description accordingly.
Mounting: The 120 mm fan is mounted with 4 threaded M3 heat inserts and 4x M3x30 screws (for a standard 25 mm thick fan, the usual radiator-fan screws). The shroud is mounted to the three GPUs with 6 M3 screws, with a minimum length of 4 mm (I used 8 mm).
Adapter for 2 or fewer cards: "3-p100-to-2-or-less-adapter" covers the unused GPU opening. I used standard PC case screws (3.4 mm thread diameter, the same thread as the screws that come with an ATX power supply).
Print settings: Printed in the shown orientation for minimal supports with a 0.4 mm nozzle, 0.20 mm layer height, and 15% Gyroid infill in PETG on an Ender 3 in about 4 h.
I designed my shroud from scratch in FreeCAD, taking all measurements myself. I only used the idea of FizzyDuncDizzel’s Tesla P100 Triple-GPU Fan Shroud as inspiration and tried to improve upon it, mainly by making mounting easier and possibly airflow better. Since I never printed the original model, I can’t say whether my design actually cools better, only that mounting is easier.
If you like what I'm doing, consider buying me a coffee.