Flshlight Holder SKADIS latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flashlight mount (26.5 mm) with a latch. An excellent solution for mounting a flashlight, especially when it has an irr
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
26.5 mm Flashlight Holder for IKEA SKÅDIS — Full-Height PLA Snap Fit
Keep your flashlight within easy reach with this one-piece holder for IKEA SKÅDIS pegboards. Designed for a round flashlight body measuring 26.5 mm in diameter, it uses two flexible snap arms for front-loading insertion, without a separate latch.
Both arms and their contact pads run along the full 39 mm height of the holder, providing an extended gripping surface. The entrance guides the flashlight past the retaining lobes, while the contact pads behind them provide a closer fit around the body.
Features
• One-piece print with three integrated SKÅDIS mounting hooks.
• Continuous, full-height snap arms and contact pads.
• Front-loading design for inserting and removing the flashlight.
• Designed for PLA; no screws, glue or assembly required.
Dimensions
• Compatible flashlight body: Ø26.5 mm, excluding the metal pocket clip.
• Overall size: 57.91 × 44.26 × 39.00 mm (width × depth × height, including hooks).
• Entrance gap at rest: 25.50 mm.
• Contact-pad gap at rest: 26.20 mm.
• Nominal rigid seat diameter: 27.20 mm.
• Flexible arm thickness: 1.20 mm.
The entrance and contact-pad gaps are intentionally smaller than the flashlight body: the arms flex during insertion and grip the body once seated.
Printing and fit
Print in PLA at 100% scale, using the supplied STL orientation. With a 0.4 mm nozzle, check the slicer preview to ensure the 1.2 mm arms are continuous and fully filled. Keep support material out of the narrow flexure slots; use local supports for the mounting hooks if required by your print profile.
Print the matching full-height fit-test coupon before printing the complete holder. Do not shorten or scale the coupon, as this changes the snap stiffness. Insert the flashlight from the front with its metal pocket clip facing the opening. Check insertion, removal and retention before regular use; printed fit depends on filament and printer calibration.