Customizable Wall Bracket Shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a number of shelf brackets mounted on a wall, wanting to add three pieces of shelf on top.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a number of shelf brackets mounted on a wall, wanting to add three pieces of shelf on top. Unfortunately the brackets were a little bit off, so the shelves looked awful where they met. 3D-print to the rescue! These little shims, printed in 1 and 2 mm heights, were enough to align the shelves nicely.
The "v8" files fit the smallest and now out-of-production brackets of a common German type, while the "-20-" files fit the 20cm version of the same brackets. The OpenSCAD file can relatively easily be adjusted to fit other sizes.