Customizable Wall Bracket Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a number of shelf brackets mounted on a wall, wanting to add three pieces of shelf on top.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a number of shelf brackets mounted on a wall, wanting to add three pieces of shelf on top. Unfortunately the brackets were a little bit off, so the shelves looked awful where they met. 3D-print to the rescue! These little shims, printed in 1 and 2 mm heights, were enough to align the shelves nicely.
The "v8" files fit the smallest and now out-of-production brackets of a common German type, while the "-20-" files fit the 20cm version of the same brackets. The OpenSCAD file can relatively easily be adjusted to fit other sizes.