CoreOne+(Gen2) INDX Tool Holder upgrade with magnet tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified tool holder for 3 x 10 mm magnets, a magnet removal hole, and m3 lock nuts.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 27
- Makes
- 0
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1.1
The tool holders I got had some pretty weak magnets causing loads of docking issues.
I got better magnets that were 3 x 10 mm cylinder magnets.
I expanded the holes in the original holder to fit the new ones and made a removal hole in the bottom to make removing them easier and not destructive.
I also added two holes to fit m3 lock nuts, as constantly screwing and unscrewing into plastic did not and does not fill me with the most confidence.
The part was printed in PETG with standard printing options. The only difference was that I changed the infill to 20% and used gyroid. Additionally, depending on the orientation, you should not need any supports.