Slot-Together 3D Christmas Baubles Set of 4 - Flat Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Four 3D tree ornaments, free: two 70 mm fretwork discs that print flat and slide together.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Four 3D tree ornaments, free: each is two 70 mm fretwork discs that print flat and slide together at 90 degrees on centre slots.
Star, snowflake, Christmas tree and diamond lattice designs. 2.4 mm discs with a solid spine round the slot, so the joint is strong. Disc A carries the hanging loop. Two-tone 3MF (red/gold, ice/white, green/gold, silver/red) or any single colour. No supports, about 6 g per bauble.
PRINT SETTINGS: Print flat, 0.2 mm layers, 3 perimeters. Slide disc B (slot from the top) onto disc A (slot from the bottom). Slot is 0.35 mm wider than the disc; add a drop of glue if your printer runs loose. Files: one STL per disc, combined STL, colour 3MF. NOTE: Not yet print-tested by me - geometry checked in Blender. Designed with Python scripts in Blender with the help of an AI assistant.
