Router Bit Tray - Three-Tier Holder for 1/4, 8 mm and 1/2 Inch Shanks, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stepped tray for router bits with rows for 1/4 inch, 8 mm and 1/2 inch shanks, labelled on each step.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A stepped tray for router bits on the bench or in a drawer, with a row for each shank size so the cutters stand clear of each other and you can see them all at once: five 1/4 inch at the front, four 8 mm in the middle and three 1/2 inch at the back. Each step is labelled. Set the number of holes and the hole sizes in the Customizer.
DETAILS
• 170 x 104 mm, three tiers (1/4 inch x 5, 8 mm x 4, 1/2 inch x 3).
• Prints with no supports: a stepped block on its flat base with the holes going straight down and the labels engraved.
• Bambu Studio: 3 h 43, 157 g.
CUSTOMIZE (OpenSCAD)
Shank sizes, holes per row and step height.