1 / 3
Kobra 3 Light Exo Head Magnetic
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
0.2 mm PETG or more temp resistance 8 5x2mm magnets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Exo printhead for Kobra 3, about 30 gramms lighter than the stock head and the frontplate can be quickly removed because of the magnets. Allows better airflow for the two fans because of the exo design.
You will need 8 5x2mm magnets, they just press in and fit very thight, in my case no need for glue, just remember to orient the magnets the right way.
I recomend using PETG or a material more heat resistent, 0.2mm should be fine, also print both parts ortiented upright so that the layerlines don't run horizontaly at the pins, otherwise they crack easily.